1. Mix round before using it and making it mix equally, the perfect
temperature for constructing is 25+/-5℃, and humidity is 55-75%.
2. Deal with the surface right, such as remove oil, dust, rust,
moisture and burnish.
3. When using the floor board, bamboo and other wood material, make
sure it must containing water below 8%.
4. It’s usually gelatinized for one time, for man hole material, it
needs to gelatinize 2-3times, and make sure gelatinize the second
time after the solvent volatilization completely.
5. Avoid it leave the air hole on the sub, it must towards one way
when gelatinize. The thinner of the contact adhesive on the sub,
the smaller of limitation and shrink, and the higher of the glue
6. Airing after gelatinizing to volatilize the solvent and increase
the conglutinate and solidification, then press it properly but not
move it come-and-go, so that it can remove the air and improve the
quality of conglutinate further.